Powerwerks PW150TFXBT Portable PA with Bluetooth (Available for in store purchase only)

NOTE:  This item is available for in-store purchase only (with the occasional exception).  Please contact us for availability because although the item may appear in stock, it may not be in stock at your nearest location.  To contact us, click on "Contact" on the menu at the top of this page to email us or call 205-758-2220 (Tuscaloosa) or 205-663-7744 (Pelham.)  Thank you!

The PW150TFXBT Bluetooth P.A. System combines quality performance and convenient features, all in a highly portable package. You’ll find that the PW150TFXBT works well in a variety of environments, amplifying vocals, instruments, keyboards, drum machines, audio devices, and more.

The four 4.5" speakers and high-frequency driver provide just the right combination of high and midrange sounds. This balance ensures your vocals cut through the mix while minimizing harsh and unwanted frequencies.

Output Power 1%
2 x 75W, 2 x 4 ohm load
Accepted Inputs
Ch1 and Ch2, Mic XLR Balanced, Line Level 1/4" Un-balanced
Ch3, 1/8" Line Level or Bluetooth Device (150TFBT models)
Frequency Response
20Hz-20kHz, Actual response is tailored to speaker cabinet for accurate acoustical response
Hum & Noise
-46dB, ResidualNoise, all level controls 0% (minimum)
-37dB, Nominal System Noise, all level controls at 50%
System Gain/Speaker Output (Measurement at 1kHz)
+49dB, Mic to Speaker Output (Ch1 & Ch2)
+35dB, Line to Speaker Output (Ch1 & Ch2)
+25dB, Aux In to Speaker Output
Channel EQ (high, low)
4kHz and above, 800Hz and below
POWERLINK (IN and OUT)
Both jacks accept a balanced input and sends a pre-master volume output mix of channels
Recommended use: Linking two PW150's or adding a PW4EX mixer
Subwoofer Out
Line Out, 20Hz-150Hz
Monitor Out
Line Out, Balanced TRS Output with grounded sleeve
Phantom Power
+15V, Mic inputs (Ch1 & Ch2)
Speakers
Four 4 1/2", 50W 8 ohm each
Horn
3 1/2" Piezo Driver
Power Capacity
150W RMS
Frequency Response
60Hz-20kHz, Full Range (subwoofer jack not used)
150Hz-20kHz, Crossover Active (1/4" mono plug in subwoofer jack)
Nominal Impedance
4 Ohm x 2, Not designed for external speakers
Bluetooth Module Features
Bluetooth 3.0EDR compliant. Typical +2dBm Class 2 output power. Audio DAC:94dB SNR. A2DP profile support
Dimensions mm (W,H,D)
190mm, 715mm, 165mm
Dimensions inches (W,H,D)
7.5", 28", 6.5"
Dimensions kg
11.3 kg